The short answer

A structural modification requires written permission, while some installations follow a procedure involving an authorised installer and an updated vehicle licence. Maintenance that preserves the approved specification is not a request to change it, but there is no blanket exemption for every accessory sold in a shop. Define the work and establish the procedure before ordering.

Who this guide is for

For car owners in Israel who want to add an accessory or change a specification, and need to know whom to contact and what to obtain before paying.

Illustration of a generic car in a garage beside a wheel, tow bar, camera and blank approval documents.
Start your upgrade by checking approval

You can upgrade a car in Israel, but no single approval covers every addition. A structural modification (שינוי מבנה) requires written permission from the Licensing Authority (רשות הרישוי); some installations have a defined procedure involving an authorised installer and registration, and an accessory being sold in a shop does not make it approved for use in every car. Before choosing a part, define exactly what will change in the vehicle and which document will establish that the change is permitted.

This distinction also matters for modest upgrades. Replacing a worn tyre with a suitable one is not the same as switching to another size. A dashcam is not software that alters engine management. And a promise that the car will pass its annual roadworthiness test (טסט) does not answer the question of whether the installation is approved. The legal information here is general and refers to Israeli sources checked as of 10 November 2026.

Start with the change itself, not the seller's name for it

Regulation 380 of the Traffic Regulations states that a structural modification must be carried out under written permission from the Licensing Authority. The definition includes, among other things, replacing an engine with one of another make or model, changing the arrangement or number of axles and installing special equipment. This list does not claim to cover every product you can order online.

The words upgrade, addition or accessory therefore do not establish the work's legal classification. Ask for a clear description: which part is coming out, which is going in, whether a detail on the licence changes, and whether the work affects the steering, brakes, suspension or powertrain. If the answer is that it is only cosmetic, establish what will actually be done beyond the change in appearance.

The Ministry of Transport and Road Safety also distinguishes certain local installations from body construction, changes of classification and other substantial modifications. Procedure H-05-2020 is not a general route to approving every idea, and its wording explicitly states that not every structural modification is approved for implementation. Laboratory approval of a particular part does not guarantee approval of a different combination involving it in another vehicle.

What is not necessarily a structural modification, and where certainty ends

Maintenance that returns a car to its approved specification differs from an upgrade that changes that specification. If you replace a tyre while retaining the registered size and meeting compatibility requirements, you are not seeking approval for a new size. You still need to choose a suitable product and have the work carried out properly; no change to the licence does not mean an exemption from safety requirements.

For accessories such as a dashcam, multimedia screen, reversing camera and parking sensors, this guide does not provide a blanket exemption that can be applied to every installation. A portable accessory connected to an existing socket and an installation that changes wiring or integrates original systems call for different enquiries. The sources checked did not establish an Israeli rule that gives advance permission for every product in any of these categories.

The practical point is not that every camera requires a structural modification procedure. It is that you should not buy on the strength of a promise that every electronic accessory is exempt. Ask the installer to define the work, its compatibility with the model and any approval required. Even for an addition that does not require registration, keep the invoice and a description of the installation.

Three upgrades with procedures you can clarify in advance

A tyre size change has an identification and verification procedure at a vehicle testing centre under Procedure H-08-2020. It refers to manufacturer or importer approval, and to an alternative in which the size appears in the professional information system specified in the procedure. Before buying wheels, start by checking tyre and wheel sizes, rather than asking which diameter looks better.

For installing a tow bar, and also for removing one, the Ministry of Transport and Road Safety service page directs owners to an authorised installer, documentation and an update to the vehicle licence (רישיון רכב). You can consult the procedure for registering a change to a vehicle's body. An invoice is only one part of the work's documentation and does not replace installation approval and any required registration.

Suspension lifts appear in the local installation procedure through a reference to a specific route for lift kits of up to 50 millimetres. This does not mean that every car may be raised by that amount, or that every kit is permitted. Whether the procedure applies to the vehicle type, kit and installer must be established before ordering; this reference does not grant permission to lower a vehicle.

Windows, lighting and exhausts also face explicit restrictions

Regulation 356(d), as published by the Israel National Road Safety Authority, prohibits registration or licence renewal for a vehicle whose windscreen, rear window or windows beside the front seats have been coated. The rear side windows are not the same as the rear window. Before ordering a package for every window, read the rules on window coatings in Israel.

For lighting, the police procedure lists improper replacement of lights, a lamp whose use is prohibited and a light colour that does not meet the regulations among the defects relevant to taking a vehicle out of use. This is not a list approving LED or xenon bulbs for every lamp. Import approval for a bulb also does not, on its own, establish that converting the particular lamp is permitted.

For the exhaust system, the same procedure addresses a missing catalytic converter, incomplete or leaking components and unreasonable noise. These are not shortcuts to better performance. Do not remove or bypass an emissions control component required for the vehicle, and do not rely on a temporary change before its licensing test. When offered a different system, establish the suitability of the complete assembly, rather than just its sound.

Engine software and electric cars need answers for your particular model

No general Israeli procedure allowing every owner to modify engine software, sometimes called chip tuning or remapping, has been established here. A change that is invisible from outside can still alter the operating specification. Ask for a written response on the approval required and warranty conditions, and do not treat an update offered by the manufacturer as approval for another provider's software.

In an electric car, even a wheel or carrying attachment may be relevant to the software system and energy consumption. In the Israeli manual for the Tesla Model Y, for example, the manufacturer notes that wheel configuration affects range estimates and tyre pressure alerts. This is an example for one particular model, not an instruction to make a change on every electric or hybrid vehicle.

A roof rack or carrier also requires compatibility and load checks for the vehicle and product. Do not infer what is allowed for the Israeli version from the towing capacity of a version sold abroad. If an approved figure is unavailable, leave the order pending until you have an answer; a good price does not fill a gap in engineering information.

Four questions to answer before paying

Ask who approves the modification, who carries it out, which documents you will receive and who completes registration. A laboratory may be involved in approving a prototype of the installation, so not every job requires a new individual inspection of the vehicle. Conversely, do not assume the installer's signature is sufficient under every procedure.

The annual test and insurance are additional checks. The police procedure allows a vehicle prohibition notice (הודעת אי שימוש) to be issued when a vehicle does not meet the conditions set for it, even if it recently passed a licensing test. Address the financial side with the guide to insurance, warranty and testing after a modification before committing to the work.

Checklist before you continue

A sound upgrade decision ends with a result you can describe precisely: what you received, what it suits and which documents accompany it. When those answers are clear before the work begins, it is easier to compare quotations and avoid a purchase that later requires removal, further enquiries and additional payment.

Found an error or outdated information? Read how we handle corrections and sources, or email us: [email protected].